Catching Up

It’s been a while since I talked about what has been going on in the ag industry. And I’ve probably been babbling far too much about radio and other non-farming/gardening stuff lately anyway, so let’s take a look at the ag sector. And I’ll slip some radio stuff in at the end that you can ignore if you want.

USMCA (NAFTA 2.0) Passes the House

As I mentioned in a previous post the trade deal to replace NAFTA is finally done and being considered by Congress.. The House has passed one version of it now, with some minor changes, but it has yet to be dealt with by the Senate. It’s not likely it will get passed this year yet (it’s already Dec 21 as I write this) and considering what is going on in D.C., it’s anyone’s guess as to when the Senate will be taking it up. Despite all of the hype coming out of Washington, right now the agreement looks like it is going to be at least as bad as the original NAFTA was. There are some improvements in the protection of workers in Mexico and environmental protections, but other than that, it doesn’t really make many changes. It’s basically NAFTA 1 with a bandaid on it. The claims that it will create jobs for tens of thousands of people and boost the US economy are completely unrealistic. This is another of those deals where the only people who benefit from it are the big corporations and a handful of special interests, but that’s par for the course with agreements like these. The original NAFTA wiped out tens of thousands of jobs, drove a lot of US manufacturing into Mexico, and disrupted the Mexican economy, especially in rural areas. This one probably won’t be as disruptive, but it isn’t going to help much. You can go look up the analysis of the treaty yourself, but right now it looks like it is going to have little or no positive effects on the US economy, and might even be worse for us than the original treaty was.

Trade War Update

It looks like things might finally be calming down a bit with China on the trade front. The administration has been claiming agreements have been made and that China is going to start buying massive amounts of soybeans and other agricultural products from the US. And, well, no, they aren’t. At least not the quantities that they’re claiming in D.C. Some of the numbers I’ve been seeing are simply ridiculous. Things are getting better, yes, but don’t look to China to start importing massive quantities of anything from us. There might be some buys, yes, but I suspect most of those are going to be little more than token purchases with few exceptions.

China lost half of it’s entire pig production because of African Swine Fever. It seems to have finally gotten the outbreak under control, but it’s going to be years before things are close to normal. Most of the soybeans China had been buying from the US was going to pig feed. So it’s unlikely it will be making massive soybean buys to feed a pig herd that doesn’t exist any more.

One thing that has improved hugely for US agriculture is China increasing the amount of pork and chicken. Because of ASF China’s lost half of its pig production, which has caused food prices to increase and there is a shortage of protein. So China has increased its buys of US pork and it recently granted permits and licensing to Tyson to sell US chicken in China. While this will certainly help the pork and chicken producers in the US, this is going to be a temporary bump that will only last until China can rebuild it’s pig herds.

African Swine Fever

ASF continues to be a major problem not only in China, which lost over half of its pigs, but also throughout South East Asia. Serious outbreaks are going on in Vietnam and the Philippines. In Sumatra it’s killed about 33,000 pigs. It’s also been found in North and South Korea, Mongolia, Cambodia, and Myanmar, as well in eastern Europe and parts of Africa. Some people feel it’s only a matter of time before it hits Australia despite it’s extremely strict regulations. For some reason people keep trying to smuggle pork from the ASF contaminated countries into other places. Smuggling is an ongoing problem in the US. We confiscate tons of sausages and other pork products from these countries that airline passengers try to smuggle through in their luggage, and even whole shiploads of pork from them. Australia confiscated 32 tons of pork products just from passengers and mailed packages alone in the last half year, half of which was contaminated with the virus. The virus itself hasn’t been seen in the U.S. yet, but it is in the wild pigs in Europe which is making everyone over there more than a little nervous. The US has a pretty good wild pig population, and while they aren’t a big issue (yet) here in Wisconsin, the DNR has issued an advisory to hunters with just about any kind of hunting license to shoot wild pigs, no “season”, no bag limit, just shoot ’em. They’re a huge problem in a lot of states, causing massive amounts of damage. Plus they carry a lot of diseases. If ASF ever gets into the wild pig herd here we’re going to be in trouble.

It was a Rough Year in the Midwest


That’s not one of my photos over there. MrsGF’s surgeries and other things kept me from getting out with the camera, but that is pretty much how it looked around here this year, especially at harvest time. Water everywhere. We officially had the wettest year ever. According to one report I read the longest dry spell we had without rain was three days. That sounded a bit odd to me so I started digging through some of the weather data and it isn’t far from the truth.

By anyone’s standards, it wasn’t a very good year for midwest farmers. Almost non-stop rain made it difficult to get anything done. There were delays in planting, delays in harvest, reduction in yields, all because of the wet weather. Around here there are still a lot of soybean and corn fields that haven’t been harvested at all because of the rain.

Corn prices never broke $4, although soybean prices weren’t horrible. But on top of relatively low corn prices, we had propane shortages which made getting the corn dried difficult and expensive.

The only bright spot was that milk prices finally came up to a fairly decent level for the first time in years. Class III milk is currently sitting at over $19 on the commodities market, but it doesn’t look like it will stay there much longer. January and February prices are down to $17 on the futures market.

Housing Issues

As if farmers didn’t have enough to worry about, finding employees continues to be a major problem both here in Wisconsin and in the ag business throughout the country. And as if that isn’t bad enough, an increasingly serious problem is where the heck are your employees going to live even if you do find some? This is a problem for almost every employer around here, not just farmers. Chances are good that employees aren’t going to be able to afford to live anywhere reasonably close to where they actually work. There is virtually zero housing in this town that would be affordable for the average low income worker. And it’s not going to be getting better any time soon. The town is putting in a new subdivision, and is quite proud of itself for doing so, but it isn’t going to actually help the average factory or farm worker around here because all of those new houses are going to be in the $180K to $250K range. What we really need are apartments that rent for about, oh, $500 – $600 a month, not houses that will have $1,500 to $2,000 a month mortgage payments.

What’s happening here is that we have a larger and larger population of people who live here, but don’t actually, well, live here, if that makes any sense. Yes, their houses are here, but their entire lives are up in the Fox Valley area about 20 miles away (the cluster of cities and towns up in the corridor that runs from Appleton, Neenah, Menash, and extends up to Green Bay). They can’t afford a house up in the Fox Valley any more, but they can afford one here. So while this may be their residence, their entire lives are centered around the Fox Valley. They buy groceries there, go to restaurants up there, meet their friends up there, do all their shopping up there. So they may live here, but they don’t actually live here. They don’t patronize local businesses, don’t send their kids to school here, don’t participate in local social events, and aren’t really part of the community.

So not only do we not have housing that is affordable by the average person bolting together snowblowers for $14 an hour, we have an increasing percentage of the population of the town who aren’t really engaged with the community at all. Their residences are here, yes, but they live their lives up in the Valley. They almost totally disengaged from the community they live in. And as a result we no longer have a clinic, no longer have a real grocery store, no longer have a pharmacy… Well, you get the idea.

It’s especially difficult for the immigrant community who make up the majority of labor in low paying jobs like farming, manufacturing (they like to talk about how well manufacturing pays – yeah, right. Starting wages at the snowblower place are about $12.95 an hour with no benefits and technically they don’t even work for the company, but for a “temp” agency.) They’re glad to get the jobs and the employers are glad to have them because they can’t find anyone else to do the work. But where are they going to live?

The Move

I’ve been talking for a while about moving all my electronics gear, the radio equipment, etc. down into a new shop/radio shack in the basement so MrsGF can take over our shared office so she’ll have room for her own projects. She enjoys sewing, making things, and would like to do quilting, but her existing workspace is a tiny, virtually unheated room upstairs, and there isn’t the room for it up there. Plus its cold in the winter up there. And even with her new knees I don’t want her to have to go up and down stairs a lot. So she’s going to be taking over the office area and I’m moving into the basement.

Now that she’s pretty much recovered from the 2nd knee replacement, I’ve started moving the “big stuff” down there. I have my primary computer down there now (I actually have space for the drawing tablet now!), the big TS-990, the antenna tuner, etc. Much to my surprise, I actually remembered how all of the cables hooked up and when I fired it all up everything actually worked! First time that’s ever happened.

I still need to do a lot of work down there. I have walls that still need to be painted. I still don’t have the electrical straightened out. I need to add at least two outlet boxes on the wall by the computer and radios, plus I need a 240V outlet there for the amplifier. Not sure why because I haven’t used the amp in years, but would be nice if I could.

I didn’t show it in the photos because it’s a huge mess at the moment, but behind me and to the left of that photo is my work bench which is covered with misc. parts, test equipment, tools, bits and pieces of RaspberryPi computers and accessories and breadboards where I’m testing radio circuits intended for the receiver I’m building. And that leads us to…

Update On The Great Radio Fiasco Project

Nice soldering technique she’s got there… (This image is somewhat infamous. Can you see why?)

I bet you thought I conveniently ‘forgot’ about that project because I am the seventh laziest person in the state (hey, I’ve gotten better, I used to be third). I haven’t, though. I’m still puttering along with this thing, even though I haven’t even fired up a soldering iron yet. Mostly I’ve been doing research. There’s no point in reinventing the wheel. Considering that radio has been around for like a gazillion years, someone, somewhere, must have already published plans for a radio receiver that I could steal (cough cough) borrow, right?

I had some basic criteria in mind when I started this. First it had to be as simple as possible, something that just about anyone who, unlike the young woman in the photo up there, knows how to use a soldering iron without suffering third degree burns can put together. Second, it had to use easily available parts, stuff the average person could get from Amazon or one of the parts suppliers like Mouser. Third, it had to be cheap. I want to encourage people to experiment and build stuff, not blow the family’s entire grocery budget for the month on exotic electronics parts. Fourth, it was going to use “old school”, so to speak, construction techniques and components. No printed circuit boards, no ICs, no SDRs, no surface mount devices, etc.

And fifth and possibly most important, it had to be a genuinely useful radio receiver that people could actually use. There are dozens, even hundreds of plans out there of various types for things like crystal radios and one transistor receivers and other nonsense that… Well, okay, so they might work, under absolutely ideal conditions, with a great deal of fiddling around, and if you live right next door to a 100,000 watt transmitter. But in the real world none of those actually work very well, if at all.

Anyway, I’m looking at various ideas and sketching some things out and doing some experimenting, and hopefully in a short (short? Ha!) time I’ll have something to show for all of this. Hopefully something that actually works. What’s been discouraging is that the schematics and projects I’ve found often contain such basic, fundamental mistakes that it makes me believe that the author never actually built the project himself and just, well, stole it, to be blunt, from someone else who also hadn’t actually built it either. I’ve been seeing things like electrolytic capacitors installed backwards, emitter and collector pins on transistors reversed, wrong pinouts shown on ICs like opamps and similar basic errors that should have been caught if anyone had bothered to actually look at the schematics.

And that’s it for now.

Author: grouchyfarmer

Yes, I'm a former farmer. Sort of. I'm also an amateur radio operator, amateur astronomer, gardener, maker of furniture, photographer.

2 thoughts on “Catching Up”

  1. You are right about the practicality of a scratch-built (not from a kit) radio. Yes, there are plans out there but most of them are not something you’d want to use for anything more than a kids science project or maybe just to tinker. That Altoid tin radio that has been floating around for at least 20 or so years looks seriously cool…until you build one and realize that operating CW-only on a one-band radio putting out a whole quarter of a watt gets old real fast. There is a similar version based on a tuna can.

    Back in my younger years I ambitiously decided to make my own AM/FM broadcast band receiver. After months of research and collecting parts., and another few weeks of soldering stuff together, I had a semi-working radio. The heart of the receiver was a chip and the audio amp design was stolen from a simple circuit I found in an issue of Popular Electronics magazine.

    It did actually receive broadcasts and sounded surprisingly good. The problem was that the selectivity sucked and it would only receive very strong stations. I kind of gave up after that. I think the radio is still in storage in my parent’s barn. Now that I’m older and much more skilled maybe I’ll give it another try. Then again, my experience and wisdom tells me it’s still a road to nowhere, even with modern chipsets.

    Like

    1. This is probably an exercise in futility and will be a source of endless aggravation eventually, but at the moment I’m enjoying it enormously. 🙂 The biggest issue with a lot of old receiver designs is selectivity. The heterodyne designs helped, but at the cost of tricky tuning and the squeal of oscillators running wild sometimes. The superheterodyne ruled the roost for many, many years and is still used today. I’ve been looking at superhet designs and I’m tempted, but that might be too ambitious a project for me. I’m looking at a reflex design at the moment which looks like it might work pretty well, at least for a first effort.

      Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s