This is sort of a catchup post because I haven’t really had enough material to justify doing an update to the blog until now, so let’s get started.
It’s spring cleanup time. Or at least that’s what the calendar tell me. Outside, though, well, it’s been bloody cold and nasty. We had about only three days here where the temperature got above fifty. Mostly it’s been in the 40s, even dipping as low as the mid twenties at night. Not exactly my idea of April weather.
It’s a mess back there in the yard, alas. MrsGF and I have been working on cleaning up the debris left from the winter and it’s starting to shape up now finally. The old ash tree in my yard and the dying maple in my neighbor’s both have been shedding branches and bark all over. The smoke you see in the photo up there is because we lit the fireplace back there both to warm up and to deal with the twigs and sticks and bark that had come off the trees during the winter.
We’re probably going to do a major expansion of the corner garden in the photo up there. That’s prime growing area there in that corner. It faces the south west so it gets full sun almost all day long, with light being reflected off the white siding, and in that sheltered area it’s the first ground to thaw in the spring and the last to freeze in the fall, and it’s very well drained. We’re going to expand that area in a semicircle out past that post with the birdfeeder, and it’s going to extend along the right side of the house past the downspouts. That will more than double the amount of square footage we have there.
Back here hopefully within a couple of weeks that big tree will be gone. It looks relatively healthy but it really isn’t. It sheds branches like rain drops whenever there is a stiff breeze and up near the top of the tree it’s starting to rot where to large branches come together off the main trunk. It’s also an ash tree so I’m surprised the emerald ash borer hasn’t attacked it yet. If we don’t take it down soon a good wind storm will take it down for us. We already had a tree service come in to look at it, and as soon as it dries out enough for them to get their equipment in there without sinking into the ground it’s coming down, along with the neighbor’s dying maple.
Getting that tree out of there will also open up a large part of the yard to full sun so we can grow a lot more stuff. We aren’t quite sure what we’ll do with the area but we’ve been sketching out some preliminary plans for a large decorative feature. Maybe. Depends on how ambitious we get.
Antenna stuff: I finally got the new off center fed dipole up when we had a rare warm, sunny day. So I was up on the roof of the garage, then about 20 feet up a couple of different trees and, well, let’s just say it was an interesting experience.
Those of you who are amateur radio operators will undoubtedly note that it is not exactly the ideal configuration for an OCFD. It’s way too low to the ground, the two legs are running in a rather tight ‘V’ configuration instead of running out straight, etc. It’s only about 12 feet off the ground and it really should be something like 30 – 40 feet up. But you work with what you have. I don’t have a tower, don’t have tall trees, and I don’t have the space to string up a 140 foot long antenna in what is supposed to be the “ideal” configuration.
And guess what? Despite all of that, the antenna works just fine and dandy, thank you very much. According to the good ole boys I sometimes listen to down on 75 meters pontificating about antennas and other things, this antenna shouldn’t work very well in this configuration. Only it does. Since I put it up I’ve had contacts in California, the Carolinas, well, all over the continental United States and Canada, and according to PSK Reporter I’ve been heard in Europe and Australia as well.
Would it work better if it were in the “ideal” configuration, up above 30 feet with the legs extended properly? Probably. Don’t care. You work with you got.
Looks like I got this one up in time because my vertical antenna is now doing weird things. The thing got whacked by a fairly good sized branch from one of the trees and I think it knocked something loose so I’m going to have to pull that thing down one of these days and check that out.
Laser engraver: The nice delivery driver who brings me goodies from time to time just dropped off the Laserpecker 2 the other day. I’ve been looking forward to getting my hands on this one after playing with the Laserpecker 1 for a few months. I have the LP2 up and running and it is very, very, very nice. It is much more powerful than the original, much, much faster, offers much higher resolution. The version I have here comes with the roller system in the box on the right. That allows it to engrave cylindrical objects like water bottles and the like. And most interestingly of all, the roller mechanism can be reversed and turned into a drive mechanism for the LP2 allowing it to travel along a board or tabletop or other smooth surface to make continuous long engravings. I haven’t set up the roller system yet and I’m looking forward to trying it.
And best of all, for me anyway, it is no longer tied to a stupid phone app to run it. You can still use a phone app, but there is actual real PC software that will control this thing. It looks like the PC software gives much better control over the engraver than the phone app did. Best of all I don’t have to fiddle around trying to get artwork I make in Photoshop imported into the stupid phone app. I can do everything right on the computer now.
Unfortunately the PC software has some serious problems with it. It’s riddled with bugs, odd quirks, difficulties in connecting the PC to the LP2 and other issues. Most of those can be worked around but frankly the PC software looks like it was never properly tested before being released.
The LP2 is most definitely not cheap. I can see a hobbyist spending $250 on the Laserpecker 1 to do the occasional engraving on an art project. It’s a fun little gadget that works pretty well and at that price you don’t need to use it a lot to justify the expense. The Laserpecker 2 package that you see here with the roller system will set you back $1,200. IMO this pushes it well outside of the hobbyist level product. In order to justify that kind of expense you need to have a serious application for something like this.
Anyway, look for a full review of the LP2 in the near future.
And that’s about it for this time. Now if only the weather would start to warm up…
While we live in town, we live in an area with large house lots, many trees, lots of bushes and a lot of rather lush vegetation, so we have the curse of the gardener, rabbits. Last year the little buggers ate all of my red runner beans almost as soon as they sprouted. There are mornings when I get up and I’ll see a half dozen of them in our yard or in the neighbors’ yards grazing on whatever the four legged locusts can gobble down. They’re getting more and more brave, too, coming out by mid afternoon in some parts of town. One of my neighbors tried live trapping them but had no success.
So to keep the little four legged vacuum cleaners out of our veggies we resort to fencing and one of the things MrsGF and I did over the weekend was put one up to keep them out of our produce. We got new fencing this year to replace the nasty looking chicken wire we used previously. It’s only 2 feet tall, a dark green color to make it less intrusive looking, and it’s fairly easy to put up. Hopefully it will keep the little stinkers out of our just barely sprouting beans.
grouchyfarmer 