I generally get up a little before dawn and just for the heck of it I went outside not long after sunrise and found our roses covered in frost and got these photos before it melted. Just cell phone images because by the time I’d have got in the house, got out the good camera and got back out the frost would have melted. These aren’t as good as they could have been I suppose, but I like them. You should be able to click or double click on the images to see a better resolution version.
Oh, the excited part? Once you scroll down past the photos I’ll tell you about that.
There’s a lesson to be learned here for amateur photographers. You don’t need to go traveling to exotic places to get really interesting photos. Just look around in your backyard.
Now, the fun part. One thing I’ve done for years now is fiddle around with 3D printing. I’ve had a Flashforge Creator Pro 3D printer for years now, although my son has had it for some time using it to print parts for a laser engraver/cutter and other stuff.
I’m getting a new printer, the brand new Flashforge Adventurer 4 that just hit the market this fall. Flashforge came out with the Adventurer 3 shortly before this one came out and this is basically the same thing only with about twice the build capacity as the 3 version. I’m really looking forward to getting my hands on this one.
This is supposed to be a more or less ‘turnkey’ printer, just unpack it, put in the filament and start printing right out of the box. The extruder can also operate at a wider range of temperatures meaning it can use just about any type of filament on the market. I liked my old Flashforge a lot but it is definitely showing its age and its inability to work at the higher temperatures that some types of filaments require limited it to using only ABS and PLA. The print quality of this thing is supposed to be outstanding from the preliminary information I’ve dug up.
Supposedly there are some issues with things like WiFi connectivity and cloud access. Neither of which I care about in the slightest. I don’t want a printer connected to the “cloud” in the first place and my preferred method of getting files to the printer is via a flash drive, not over the network.
Anyway, this puppy is supposed to be here within the next seven to ten days so keep an eye out for that in the future.
Well, okay, not according to the calendar. But as far as I’m concerned the seasons change not by the actual date but according to the weather conditions. We got hit with a hard frost the other day and that pretty much brings the growing season to an end for a lot of our plants. So that means it’s autumn no matter what the calendar may say.
And while it may be chilly outside, we’re still getting a new central air system put in tomorrow morning. Our old air conditioning system is probably pushing 25+ years, if not a bit more than that. It’s actually a bit amazing that it lasted this long. But it has a freon leak now, and while they could probably repair it, we’d still have a 25 year old AC system that could fail at any time just when we need it most. This is as good a time as any to get it done. Probably the ideal time, really. The air conditioning season is over, the heating season hasn’t started yet, so the company has the time to do it. So we might as well get it over with now so we’re ready when the heat comes next summer.
Gads, it’s going to be an expensive fall, though. The AC is going to run us $3,200 (this is a big house). The contractor just called and said our new windows and doors are now ordered so he’s going to be rolling in sometime in a couple of weeks to do that, that’s going to be over $7,000. Ouch. Still, it all needs to get done. Especially the windows. One window on the north side of the house is literally rotting away and won’t survive a winter and the exterior door is nearly as bad. So once that’s done we’ll be ready for cold weather. And we got a taste of that already as you can see from the frost covered grass below.
It got cold. The remote sensor for the thermometer is out on the front porch which is pretty sheltered, and that said it got down to 32 F so that means out in the yard and gardens it got well below 30. The grass out in the yard was white with frost before the sun came up and the roof was covered with frost, so it was pretty cold out there for a fairly extended period of time overnight.
This is the time of year when we’d normally have so many pears we didn’t know what to do with them, so it seems odd not having the tree any more. While I do miss having fresh pears, I don’t miss having the tree, to be honest. It collapsing and having to be removed wasn’t really a bad thing. If it were still there the whole area would be covered with a thick carpet of fallen pears, and those would be covered with bees, wasps and, well, it could get nasty out there. MrsGF and I would no sooner pick up 5 gallon buckets full of the things, and the tree would drop a few hundred more.
We’re already talking about what we’re going to do with that area. Now that it isn’t shaded out by the tree we can grow just about anything out there and we don’t have to worry about finding plants that can handle shade. We’re thinking about putting a raised bed out there or expanding the existing garden that was being shaded out by the tree that we had in flowers.
The frost brought an end to the tomatoes, of course. But that’s not a big loss because they were already well on the way to winding up anyway. The peppers are still doing fine, though. They aren’t as fragile as tomatoes are and are in a sheltered area that didn’t get hit with the frost.
The raised beds did very, very well again this year. Building those was the best thing we’ve done in the garden over the years. We cut back on the number of tomato plants drastically this year and still had more than we really needed. We planted onions around the outside edges of the raised bed and that worked out beautifully as well. The onions did really well. We didn’t have to buy a single onion all season. Just walk out to the garden and grab one. I am really going to miss that. I’m going to miss the flavor even more. Like just about everything else we grow the flavors are much more intense than the produce we get from the store.
We took a break and drove all the way to the lakeshore between Manitowoc and Two Rivers to have a picnic. Cold down there along the lakeshore, but wow, it was a beautiful day. Had a very pleasant afternoon down there. With Wisconsin’s infection rate now totally out of control and the county we live in having one of the highest infection rates in the state, opportunities to do anything are a bit restricted so just getting out and about was nice.
I haven’t talked about the virus and how it is effecting our lives because, well, you get enough of that everywhere else, don’t you? Still it’s very frustrating. This was supposed to be more or less under control by this time. Instead the number of new infections is hitting new records almost every day here in the state. It’s completely out of control here. ICUs around here are at full capacity and they’re trying to find beds in other hospitals in the state and, well, it’s scary. MrsGF and I are both in one or more high risk groups so… Well, you know. To top it off I pretty much have virus like symptoms all the time. I have upper respiratory allergies so I always have congestion, watery eyes, stuffed up sinuses, a slight cough, etc. Basically I have almost all of the early symptoms of the virus all the time except the fever. Sigh…
But enough of that. How about a rose instead?
Yes, we still have flowers despite the frost. Some of the flowers are pretty resistant to cold weather and are still doing fine, and we have a potted rose up on the front deck that’s still in full flower.
Let’s see, what else…
I’m going to take a stab at resin casting, which ought to be interesting. I’ve gotten reasonably good at wood turning and am now looking for a way to expand on that a bit by doing stuff like, well, this-
I doubt I’ll ever get as good as this guy, but what the heck, why not give it a try and see what happens? I’m rather impatient to give this a try. I have just about everything I need except for the resin and that should be here this week. I hope. More about that when it actually happens. A lot of the videos you see make it resin casting look easy. It isn’t. I expect my share of utter disasters as I get started with this.
And once again the importance of proper safety gear was proven to me rather dramatically when this happened:
Ouch, that could have been nasty. I was turning a bit of white oak when the tool got caught, hard, on an imperfection in the wood. Not only did the force snap the tool in half, it hit so hard it actually bent the tool rest on the lathe and I have to get a new tool rest. The metal part of the tool snapped clean out of the handle, splitting the handle in half, and flew up and hit me square in the face. If I hadn’t had the face shield on, well, it would have been nasty as I said.
MrsGF and some family members have once again been suggesting I try selling some of the stuff I’ve been cranking out. And I suppose that some of it is good enough that it might be marketable. But there are so many issues with trying to sell stuff and, well, is it worth the effort? I used to run my own business so I know a bit about all of the permits, red tape and tax issues that go along with operating a business legally. Emphasis on that word, legally. A lot of people try to slip under the radar, thinking that they’re too small and insignificant for the government to bother going after them if they try to ignore all of that. But do you really want to take that risk? Heck, even zoning can be a problem. You may be turning out some really neat stuff down there in your work room in the basement or that spare bedroom, and no one is going to bother you because it’s a hobby. But if you start selling it, well, now you are a business, a manufacturer, and a lot of communities have very strict zoning ordinances concerning manufacturing. Zoning boards are often very unforgiving. They don’t give a fig if all you’re making a few pens and selling ’em on Etsy. You’re making and selling stuff commercially so you are a manufacturer. Period. Things can be even more strict if you’re in a home owners association.
And then there’s pricing your stuff. I did a scrounge around Etsy the other day looking at the various vendors selling bowls and, well, either they’re losing their shirts on every sale or something funny is going on. I found one person selling 6 inch wide, two inch deep “hand crafted solid black walnut” bowls for $20. Seriously? You add up the cost of the wood, sand paper, the finishing materials, add in a bit to cover the cost of the tools, the lathe, etc., and you’re already losing money at that price. And that isn’t even beginning to add in the cost of Etsy’s fees, bookkeeping, filing taxes, or the maker’s time to produce the bowl. So yeah, either the maker is losing his shirt on every sale, or there’s something unethical going on. I did some quick estimates and I’d figure that just to break even I’d have to sell a bowl like that for about $35, and that would be essentially doing all the labor for free. And he’s running them out for $20?
So the thing is, even if I’m only turning out a bowl a week or so, it’s just not worth the hassle to try to go commercial and sell this stuff.
That’s all for now. I’m working on the next part in the tool series. That’s going to be covering the big stuff like table saws, jointers, planers and other big ticket items. I’m having to do some serious research because I’m not really up on what’s going on in the market right now. I’ve owned all of my big power tools for at least 10 – 15 years. One of the good things about big ticket items like this is that while they’re expensive, generally speaking they’ll last you a lifetime, so you only need to buy them once. Hopefully.
Sidenote: I rarely look at the viewer statistics but I did notice an interesting thing the other day. It seems a lot of my readers are from India. On a lot of days the number of visitors from India outnumber even those from the US. India is one of the most amazing places on the planet, so I’m delighted by that. I don’t understand how they found this goofy blog, but I’m thrilled they come and read this.