Aspen Tree Service from Chilton was here Thursday and Friday of last week to take down the ash and maple trees out back. The ash tree he’s working on in the photo looks fairly healthy but it wasn’t. About a quarter of the branches he’s taking out up there were already dead or dying. He found evidence of a fungus infestation up there as well as some rot starting in the crotches where the main branches attached to the trunk. The maple tree was in even worse condition.
To give you an idea of how bad that ash tree was that pile of firewood in the foreground to the right of the chairs are just from branches that fell down in the last few months
I’ve dropped a lot of trees in my life but there is no way I would try to bring down two full size trees near buildings and decorative landscape features like these two are. In cases like this I let the professionals who have the equipment and experience deal with these situations. These guys are good. They’ve been in the business for years and know what they’re doing.
And down comes the ash. That tree was pretty massive. All of us underestimated just how big the thing was. The main trunk ended up being almost 36 inches thick. The maple was smaller, about 28 inches thick at the base.
Normally when these guys get done with a job you can hardly even tell there used to be a tree there. They clean up everything, haul it all away, take out the stump, repair any grass that was damaged, seed bare ground, etc. But I complicated things for them because I wanted to keep the wood, or most of it. They chipped the brush and hauled it off but I got everything else. And now I have a massive pile of wood to deal with.
Why would I keep all that stuff? I hate to see anything go to waste, especially trees. I love trees, but I know that eventually all trees die and have to be taken down and I’d like to see them used for something useful rather than ending up being chipped for mulch. Even going for firewood would be better than having them just dumped somewhere and left to rot. We have friends and family members who use wood for heat so a lot of the smaller stuff might go to them.
We’re contacting a couple of local guys who have small sawmills to see if they can use anything in that pile up there to make some usable lumber. The problem with urban trees is that the big lumber companies don’t want to deal with them. Running their equipment into a town just to pick up one or two logs isn’t cost effective for them. Plus the logs are often too short for them to get commercial sized lumber out of them. They want logs that are over 8 feet long and most tree services cut them up much smaller than that to make them easier to remove. And the firewood dealers around here don’t want to deal with 36 inch thick logs, either. It’s too big for their equipment to handle. So as often as not those logs end up being dumped in an old gravel pit somewhere and just rotting away.
I want to keep a lot of the wood myself. I’m going to make bowl blanks out of as much of the wood as I can for future projects. Ash and maple are both great woods for making wood turnings. I figure I’ll end up with enough material to keep me busy for the rest of my life.
There’s a stump in there too, somewhere. We’re going to keep that too. That’s going to become some kind of centerpiece for a decorative feature we’ll be putting in back there. We’re kind of tossing around ideas for how to deal with it. Right now we’re leaning towards the idea of using the stump as a base for a bench in the center of a decorative garden. We’ll see how that goes once we get the mess cleaned up back there.
On The Silly Side…
On the silly side of things I’m making allegedly humorous “artwork” for a brewpub down in Milwaukee and then using one of the lasers to engrave it on stuff for them. Drinks coasters seem really popular. People just sort of start giggling over these things when they find them under their glasses at the bar. I either draw the images myself or, as is the case with the one on the left, I find public domain images and add suitable captions. Hopefully people steal them and take them home. They’re cheap to make and if people pass ’em around it’s good PR for the pub.
After a brief bout with unusual heat where temperatures pushed into the 90s (Appleton school district actually canceled classes last Friday because of heat) we’re back down to daytime temps in the 60s and low 70s, which is close to what we should be getting. The gardens are coming along nicely. We decided to put off increasing the size of any of the planting beds or making other major decisions until after the trees come down so we can better decide what we want to do out there.
The big decorative bed out towards the back of the yard is doing well. The irises are looking beautiful and so are the other plants that made it through the winter. It doesn’t look like MrsGF’s blueberry made it though, alas. We just haven’t had any luck at all when it comes to blueberries. Either they succumbed to some kind of fungus, even though they were supposed to be resistant to that, or they didn’t survive the winter.
The raised beds are looking very good indeed. Carrots and beets are all up and looking good and the garlic and onions are doing quite well. We put in a lot of onions this year. We use a lot of them, both for eating fresh, as an ingredient in tomato sauces and other recipes, salads, etc. And they just taste better than what you get at the store. Most of the varieties you see at the grocery stores seem to be moving towards types that don’t actually taste like onions any longer. They’ve decided that consumers don’t like tangy, spicey onions and they want varieties that are more mild, lack flavor, and even are sweet. If you like sweet onions, good for you. Everyone has different likes and dislikes. But I want an onion that smells and tastes like an onion. We had one bag of store bought onions come through here where I swear I thought I had Covid because I couldn’t smell them when I was cutting them up. They were so mild you could have eaten one like an apple.
The hostas in front of the house are looking really good this year. They seem to do quite well up in front even though the soil up there is really, really nasty.
And the goofy little Hens and Chicks up there that we scattered around the fence posts are doing pretty good too. They’re now moving all along the area between the cedar fence and sidewalk. They’re fun little things and seem to do good up there.
We have pole beans in this one. They did pretty good last year so we decided to plant them again. Along with more onions and some lettuce that I think we’ll be able to start eating in another week or so.
The corner garden has squash again this year, with parsley planted along the outside edge and, of course Mr. Spiny the cactus back there on the right.
Things are really dry here right now. We had to start watering the gardens yesterday. Our weather patterns here seem to have really changed a lot over the last few years. We’re getting more long periods without rain at unusual times of the year, unusual periods of extreme heat, less snow during the winter. Weather is highly variable, of course, but this seems to be a trend moving towards less predictable weather events.
Dr. Who – I must confess I’m something of a Dr. Who fan. Sort of. Or was, rather. My affection for the Dr. goes way back to the era of rubber monsters, all the “alien” worlds being filmed in the same rock quarry, and the utterly silly fellow with the long scarf and an addiction to jelly babies. Basically it was a kids show with a skimpy budget, often ridiculously silly plots, bad acting and, well, you name it. It was juvenile. It was fun.
But then came along Colin Baker as the Dr and he and the writing just rubbed me the wrong way. Baker came off, IMO, as utterly arrogant and, frankly, an asshole. And his sidekick, Perry, played by Nicola Bryant, quickly became known around the family as “Miss Cleavage” because of the often ridiculously low cut shirts she was dressed in to show off her, well, cleavage, for basically no reason 0ther than trying to “sex it up”, so to speak. I suspect they were trying to push up sagging ratings as high as the outfits pushed up Ms. Bryant’s anatomy.
That was the end of my watching Dr. Who until the reboot when Eccleston popped up as the new doctor and, well, wow. All of a sudden the show had an actual real budget with actual real special effects and actual real plot lines and good acting (mostly) and good writing (sometimes). And it stayed good for quite some time. But then the show started to suffer from what I call The Topper Syndrome. The writers weren’t satisfied with just writing good stories. Every new episode had to top the last one, they had to get bigger and more exciting and cover more and more crazy monsters and conspiracies and have bigger explosions and you just can’t keep that kind of thing up for very long without ‘jumping the shark’, as they say. That phrase means a show has so worn itself out that it has to resort to ever more bizarre and ridiculous stunts and gimmicks in order to try to keep it’s sagging ratings from sinking even further.
Then along came Jodi Whitaker as the first female doctor and I thought that, finally, the show was going to refresh itself, become more interesting, more entertaining, focus on story and plot and… And no, it didn’t. They utterly wasted Ms. Whitaker’s talents by bogging her down in one endlessly dull, and even insulting story after another. A lot of people attributed the flagging ratings and increasing criticism of the show to misogyny on the part of the Who fans, and even to racism and prejudice because the story lines now included persons who experienced physical and mental challenges and dealt with racism. I don’t think that’s true, though. I do think the show went over the top occasionally because it seemed it was going out of its way to be “inclusive”, but I think the real problem was that the writing was just plain not very good and the directing was even worse. As often as not Ms. Whitaker was made to look like some kind of overactive, over excited child hopped up on espresso and sugar instead of a thousand year old Time Lord.
So now we’re about to get a new Dr. Who, Ncuti Gatwa and I am very much looking forward to seeing him in the role. He’s young, just 29, and IMO he’s an excellent actor who I think can bring new energy, new poise and a new interpretation to the role. He’ll be the first black actor to take on the role.
What I find a bit curious is that they’re bringing back the Rose Tyler character, but she is not going to be played by Billie Piper who was the original in the series reboot. Rose Tyler is now going to be played by Yasmin Finney. Exactly how they are going to explain Rose Tyler changing from a young white female into a young black transgender woman is going to be interesting. I’m rather looking forward to that too.
Rumor has it that the “multiverse” is going to be involved. The multiverse has become just one of a long series of deus ex machina plot devices writers turn to when they write themselves into a corner. Dr. Who has already dabbled in that nonsense early on when the Rose Tyler character became too intensely involved with the Dr, so they conveniently trapped her in a different universe that she couldn’t escape from. Well, couldn’t escape from until the writers decided that she could.
One of the issues with the rebooted series is that they constantly introduce story lines that focus on the Dr’s companions, and the companions start to become more popular with fans than the Dr and they can’t have that so they have to get rid of companions or the show isn’t about the Doctor any more. So Rose Tyler ends up trapped in another universe. Amelia and Rory get trapped in the early 20th century for reasons that are never adequately explained and die of old age, Clara outright dies, but then is resurrected again immediately and somehow is still out there, somewhere, running around in a stolen Tardis, still dead but somehow still alive, Donna Noble, they had to get rid of her because she got too popular and somehow absorbed all of the knowledge of the Time Lords, so they erased her memory… But then plot holes big enough to drive a truck through and unsatisfying loose ends (like Clara, and the the Dr’s daughter (technically a sort of clone but that’s what they called her)) are, alas, rather common.
Here’s a lesson for you, if some dude in funny clothes shows up in a Tardis and wants you to go traveling with him, don’t go. It doesn’t end well.
We’ve been on a sort of weather rollercoaster here. We went from high temperatures in the low fifties to 91 degrees and humid on Tuesday, then back down to a high of about 60 on Wednesday, and today we’re supposed to be back up in the steam bath again today with temperatures up in the 90s. Sheesh. It’s been an odd spring.
I’m back out on the bike on a regular basis at least thanks to the warmer weather. It looks like farmers are a bit behind in planting this year from all of the unplanted fields I’m seeing out there.
It’s dry out there, folks. According to the statistics we’re reasonably close to normal rainfall, but actual ground conditions are not good. The entire state is under a burning ban and we’ve had wild fires popping up all over the state. Some parts of the state got some decent rainfall but it skipped around us. We’re going to have to start watering the vegetable beds here today or tomorrow if we don’t get some rain.
Now that I’m back on the bike again I’ve been down to the river at the old stone bridge about 4 miles from here and things look unusually dry down there as well. Water levels in the river are unusually low for this time of year. This branch of the Manitowoc River usually isn’t this low until mid to late summer.
The old stone bridge is a great spot to stop and get a drink and just watch nature. There’s almost no traffic on that road. I’ll stop there for ten or fifteen minutes, get out my water and stand on the bridge and just watch nature. There are at least two families of geese out there, a few muskrats swimming around, turtles and birds everywhere.
Here at the house the early spring flowers are popping up everywhere. The tulips are coming up now that the daffodils are coming to an end.
Out in the raised beds everything is coming up; onions, lettuce, carrots and beets and even the garlic is emerging now. The garlic we planted last fall didn’t make it through the winter, so we planted a different variety and hopefully we’ll get some by fall. We’ll see how that works out.
We talked to the tree service and let them know that it’s dry enough out here now that they can get in with their equipment so they’re going to be coming over next week to take out the two trees you see in the photo up there. The one on the right is a big old ash tree that’s starting to rot from the top down. Every time we get a good wind it sheds branches all over, some of them big enough to cause damage or injury if someone happened to be standing in the wrong place. The one on the left is an old maple that belongs to our neighbor. Almost the entire right side of the tree up in the canopy is dead so that one has to come down too. I hate to see trees coming down but these two are at the end of their lives and they need to come down before they do some serious damage or even hurt someone.
Removing the big ash gives us a lot more options for gardening as well. It shades out a huge amount of space in the yard making it difficult for growing anything except grass and weeds back there. Once that’s gone we’ll have a large area back there with full sun that give us a lot more opportunities for growing stuff. We have some general ideas about what to do with the space back there but nothing firm as yet. I’ll keep you posted.
With those trees coming down I also had to take down my OCFD antenna (off center fed dipole) and it’s a good thing I did because I found this:
Well, that’s not good, now is it? The antenna was just hanging on by a thread. Fixing something like this isn’t hard to do but it’s annoying. The problem area is only a few feet from the end so I could have just fudged it by cutting it off at the frayed bit and attaching that to the insulator. Cutting a couple of feet off of a 130+ foot long wire antenna isn’t going to screw it up too badly, especially since I use an antenna tuner anyway.
What caused the damage? The antenna was running to the cedar tree behind that small shed in that photo of the trees up there. It looks like my line sagged letting the wire down far enough so it was rubbing on the roof of the shed.
I really need to look into a different antenna configuration. That OCFD is just too long to fit completely in my yard. Fortunately both of my neighbors don’t mind if I run a line into trees on their property, but I need to try to figure out a different way of setting it up to try to keep it entirely on my property. I do have a vertical antenna which works fine, but that OCFD gives me more options. And it’s also my NVIS antenna for semi-local communications down on 75 meters and I don’t want to give that up.
Other stuff going on:
Now that the weather has turned nice I can finally finish up bringing down the dropped ceiling in the woodshop. I’ve been procrastinating on that because there is a lot of dust up there above those ceiling tiles and I wanted to put a couple of exhaust fans in the windows to suck it out of the house instead of having it plug up my air filters in the shop. That ceiling is getting bad. It’s been up for more than 20 years, and incorporates old fashioned fluorescent tube lights which are terribly energy inefficient. I already have new shop lights waiting to go in, LED versions which will use about a quarter of the energy and give better light.
I reviewed the LaserPecker 1 laser engraver a while back, and I now have its big brother, the LP2 sitting on the shelf and in use and I want to do a review of that. The hardware is very, very nice. It’s much, much faster, more powerful and has a lot more options, including a roller system that should be very useful. Unfortunately it shares the same major problem the LP1 had: the software is horrible. This is a professional quality engraver that is badly hampered by amateurish cell phone based operating software. There is PC based software for the LP2 which is what I’ve been using which makes it easier to use, but the program riddled with bugs and odd quirks. It’s sad, really, because the LP2 is a fantastic gadget. I’ve been doing custom artwork and engravings for a craft brewer and pub owner in Milwaukee and it does a great job.
On the wood lathe side of things I’ve had a really nifty bowl hollowing system sitting around for months now that I’ve never had an opportunity to really talk about here, so I need to put that in the que one of these days.
And one of these days I want to talk about the “metaverse”. What’s his name over at “Meta” as they now call FaceScam, uh, excuse me, Facebook, has stumbled across an idea that is at least 25 years old and has been done before with varying degrees of success (and more often failure), they’ve stolen that, claimed it as their own, and is now are hyping up a storm. Meta’s “vision” of this metaverse is, frankly, silly, childish, badly implemented, laughably cartoonish and doesn’t even take into account basic human nature. It’s really kind of sad, to be honest. I’ve seen Meta’s “virtual world”, which they call Horizons, and to be honest it looks like a badly rendered version of The Jetson’s cartoon show from the 1960s. To call it cartoonish is insulting to cartoons
I want to talk about cameras too somewhere along the line. I want to talk about “cryogenic” tools… Egads, look at that list… Sigh… I’d better get to work.
Well, maybe I’ll get to work later. Right now it’s sunny out, warm, there’s a bicycle sitting in the garage waiting for me…
The weather has finally started to turn! After one of the nastiest Aprils I can remember with almost perpetual clouds, cold, rain, mist and snow, it looks like we’ve turned the corner.
Daytime temps have been up in the mid to high 50s, even pushing a bit over 60. And we’ve had bright, sunny days. MrsGF and I have been spending a lot of time outside cleaning up after winter and things are starting to shape up nicely. The daffodils are all up and it’s delightful to see those bright yellow flowers out there.
We’ve even planted some stuff already, although that’s a bit chancey this time of year. We have a lot of onions out this year. One whole raised bed is all onions and some garlic this year.
And this…
That’s lettuce. Yes, lettuce. MrsGF said what the heck and put in a bit of lettuce just to see what would happen. I thought the ground was still too cold for the seeds to sprout but damn, look at that up there. Lettuce growing. In Wisconsin. In the first week of May. Outside. Sheesh…
Rhubarb is well on its way as well. It’s always the first thing to pop up out of the ground.
The irises are all up as well and looking beautiful. They’re early risers as well, so to speak. They’re about 8 inches or more tall already and looking very good.
Thanks to the old ash and maple trees back there we’ve had to clean up a lot of branches and twigs. Most of them went down to the town compost site where they’re chipped and turned into mulch but some of them went to feed the stainless steel fire thingie we picked up early last year. That thing was one of the best investments we made. It wasn’t cheap but it’s well made out of thick stainless steel. Beats the heck out of something like a firepit or one of those cheap sheet metal ones you get at the big box stores that rusts through within a year or two. Because of the clever venting system it has there is little or no smoke, and fires are fully contained so the chance of starting the grass on fire is virtually zero even in dry conditions.
Hopefully our big ash tree and the neighbor’s maple will be coming down soon. The two of them are definitely at the end of their lives. Large amounts of bark are coming off the maple along with branches and there is significant rot up in the ash tree where some of the main branches come together.
With the trees coming down soon I had to take down my OCFD wire antenna, and discovered significant damage on it where it must have been rubbing against something. Sigh… Always something. Fortunatley I found that before it got bad enough for the wire to break completely. I’ll have to fix that before it can go back up again. Grr…
So I only have the vertical antenna in operation right now and that has some issues as well, it seems. I’ve noticed that the SWR is fluctuating a bit. The meter indicates it’s fluctuating from about 1.12 to 1.16 during transmissions. I’m not sure if that is being caused by the antenna itself or feed line, or if it’s something in the meter on my Palstar antenna tuner. If I look at the SWR meter built into my transceiver I don’t see any fluctuations at all, but then that is a tiny, tiny flutter in the first place and that meter might not “see” it. I might be worrying over nothing but it still makes me a bit concerned.
The improvement in the weather means I can get out on the bicycle again. I love biking but not when the temperatures are down in the 40s. For the last few days I’ve been getting out every day for a half hour or 45 minutes to try to build up my endurance after a long winter of basically not doing much of anything as far as exercise goes.
That’s it for now. Time to get back out into the gardens!
Addendum – just got stung by a wasp. Damn that hurts! Wonder what I did to make him mad at me?
grouchyfarmer 