Amateur Radio Stuff: It’s Alive!

Screen Shot 2017-12-24 at 8.56.34 AM
That spike you see there is the 990 sending a PSK31 signal on 10 meters. It’s working! OMG it’s actually working! Finally! 

The saga of me trying to get operating in digital modes on HF following tearing down my station so I could move in new furniture continues and hopefully it has reached a satisfactory conclusion. But only after a very frustration couple of hours.

I few days ago I commented about the frustrating time I was having trying to get back on the air after putting my radio equipment back together. I primarily use digital modes on HF, usually PSK. And even though everything was set up exactly the same, it wasn’t working. I finally got it working, but only by triggering the transmitter using VOX. This was not ideal, but it did work.

Well, this morning I was going to fire up the equipment and play amateur radio for a while and, well, VOX didn’t work either all of a sudden. And for no apparent reason.

Sigh…

I checked all of the cables. I opened up the RigBlaster and checked for loose wires or bad solder joints and found nothing wrong there. I reloaded drivers, reset all of the settings, tried both Fldigi and Ham Radio Deluxe. Receive worked just fine. The software could control the transceiver just fine. It would even kick the transceiver into transmit mode. But no actual signal was being transmitted. I checked sound levels on the inputs and outputs, checked COM ports and PTT settings… Nothing was working.

After over an hour of this, I was ready to give up. I went through all of the settings one last time, double checked everything, switched the RigBlaster to COM for PTT, clicked the button to do a CQ and…

It worked? It worked??? WTF?

What did I do? How did I fix it? I have absolutely no idea!

Seriously. As far as I can tell all of the settings are exactly the same now as when they were when it wasn’t working. Same drivers, same sound levels, same everything. Only now it works… I must have changed something, but I have no idea what. The infuriating thing is that I must have spent at least four hours over several days trying to figure this out and I still don’t know what was wrong.

Screen Shot 2017-12-24 at 8.56.44 AMOkay, now let’s talk about Ham Radio Deluxe.

Now if you’ve followed this blog for a while, you know I’ve used HRD in the past and did not have a very good opinion of it. It is an extremely ambitious piece of software that tries to do just about everything and anything an amateur radio operator could want in a program. And I had some “issues” as they say. Some of them were pretty serious.

I’m pleased to report that issues I had in the past seem to have been fixed. Customer support seems to be very good. I had a minor issue not long after I bought it, put in a trouble ticket, and got a response back that fixed the problem in just a few hours.

I’m going to keep using it and we’ll see what happens.

Author: grouchyfarmer

Yes, I'm a former farmer. Sort of. I'm also an amateur radio operator, amateur astronomer, gardener, maker of furniture, photographer, wanna-be artist, owner of cats, motorcyclist, cook, and I'm trying to learn Japanese for the heck of it.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s