Laserpecker 1 Update: Stand Is Fixed!

Well the problem with the LP’s autofocusing stand has been solved and it is now working properly. It turned out that the problem was the power cable going from the power pack to the stand. I’d tried several different power supplies thinking that the one that came with the LP couldn’t handle the increased load from trying to run both the LP and the stand at the same time. And as a last resort I put in a different cable and, well, bang, away it went.

So the autofocusing stand is now working just fine and has actually become rather handy. But to be perfectly honest I still don’t recommend you get it. I just don’t think it’s worth the $200 they’re asking for it. The standard version with the tripod will do the same job as the “pro” version that comes with the autofocus stand. All you need to do is adjust the tripod so the LP is about 200mm away from the object being engraved. Easy and takes almost no time at all.

my Gangou laser from a pic off amazon because I can’t be bothered trying to go through my whole media library trying to find one of my own pics

I’ve been working the LP hard for the last couple of weeks, and I mean seriously hard, probably far harder than most users would. It’s been going almost nonstop (alongside my Gangou) doing a production run of customized artwork for a brewpub down near Milwaukee. All told the Laserpecker has had well over 100 hours of use now and it’s still going strong. It’s performed flawlessly.

The LP was supposed to replace the Gangou which had some problems, but I got the Gangou fixed, which was a good thing because laser engravers in this price range are slow. I had both of them up on the bench working side by side for this project.

Comparing the two of them side by side was interesting. The LP is just so much more sophisticated and easy to use, and does such a good job that the Gangou is probably going to get sold or given away.

The biggest drawback to the LP remains the software. I won’t get into that because nothing has changed since I did the review.

So, if you’re a craftsperson working with wood, paper, fabric, leather and the like, and you think a laser engraver would be useful, should you consider the Laserpecker 1? Yeah, I think you should. You’re restricted to engravings about 100mm by 100mm (about 4 inches square) but it’s rare that you’ll ever need to make engravings larger than that. It’s well made, it’s fairly simple to use, despite the wonky software, and it has been a real workhorse for me so far. It’s been doing back to back engravings for me for a couple of weeks now. And even at $300 the price isn’t too bad. Yes, there are cheaper ones out there. The Gangou in the picture up there is about $250, but it is clunky, awkward, noisy, takes up a large amount of workspace, and is at least 30% or more slower than the LP1. Oh, and the Gangou’s software utterly and totally sucks. If you can get it to work at all.